Haier refrigerator error codes – Refrigerators and freezers

8 codes from the Haier service manual, with what each one means and the usual causes.

You can safely switch the unit off at the switch, wait 5 minutes and switch on again. Don't open the unit, touch wiring or handle gas: these checks need a trained technician.

F1also F2, F3, F4, F5, F6, F7, F8, F9

Sensor error (F1-F9 = one of the temperature sensors)

What our technician checks

Unplug the sensor and measure resistance against the temperature and compare with the resistance chart for that model (fridge sensors are typically between 2 kΩ and 10 kΩ at 25°C, rising sharply when cold). Check the connector and wiring through the door hinge / foam for breaks.

Book a technician for F1

Fralso FR

Sensor error

What our technician checks

Unplug the sensor and measure resistance against the temperature and compare with the resistance chart for that model (fridge sensors are typically between 2 kΩ and 10 kΩ at 25°C, rising sharply when cold). Check the connector and wiring through the door hinge / foam for breaks.

Book a technician for Fr

Eh

Sensor error (humidity / ambient)

What our technician checks

Unplug the sensor and measure resistance against the temperature and compare with the resistance chart for that model (fridge sensors are typically between 2 kΩ and 10 kΩ at 25°C, rising sharply when cold). Check the connector and wiring through the door hinge / foam for breaks.

Book a technician for Eh